TMR | Performing A Controlled Test On A Range

Required Information for a Controlled Test

  • Site name & Key
  • Local time for testing site
  • Bay number
  • Club (must change as showed in the example below). Default Clubs are:
    • Driver
    • 7 iron
    • 56-Degree Wedge
    • Unless anything else is requested by Support
  • Timestamps down to the second for each shot (note down if a shot was missed in tracking as well)
  • Additionally notes for each shot requested by Support (Data quality, bay association, conversion, ghost shots, etc.)

Example:

Site name (site key)

Test focus: Conversion

9am

BAY 8 

PW

01.56 - Bad hit = Bad conversion

02.18 - Good conversion

02.46 - Good conversion

8i

03.16 – Bad conversion

04.29 - Good conversion

05.39 - Good hit = Bad conversion

07.01 - Bad hit - 10m longer without conversion

08.01 - Good hit - Bad conversion

08.43 - Good hit - good conversion (first good)

08.16 - Longer without conversion

Intentionally left

09.58 - Longer without conversion

10.28 - Good hit - ok conversion

10.47 - Good hit - good conversion

11.12 - Good hit - bad conversion

Intentionally right

11.50 - Longer without conversion

12.16 - Good hit - bad conversion

12.42 - Longer without conversion

13.01 - Bad shot - Bad conversion

Driver

16.37 - Good conversion

17.06 - Good conversion

17.36 - Good conversion

18.02 - Bad hit

18.51 - Thin - Good conversion

Didn't find what you were looking for?

Search