If your range screen is not functioning properly there might be an issue with the power connection or the network connection.

Please follow the steps below to troubleshoot these issues.

How To Power Cycle The Range Screen

1. Basic Power & Connection Checks
   • Ensure the screen is securely connected to its power source.
   • Power Cycle the Screen: Turn the screen off using the power button under the screen. Wait a few seconds, then turn it back on. If the issue persists, repeat this step one more time.
2. Network Connection
   • Check the Ethernet cable: Ensure the Ethernet cable is firmly plugged into both the screen and the network source.
   • Inspect the cable: Verify that the Ethernet cable is in good condition and shows no signs of damage.

If these steps did not resolve the issue, please refer to our article on the screen replacement process: 🔶 Range Screen Not Working?

If your issue still persists, please submit a support ticket here.